[TUT] How to flash and root Samsung Galaxy Ace S5830

[TUT] How to flash and root Samsung Galaxy Ace S5830

This method is the simplest way to do it.

Shall not be liable for any resulting damage to your phone! Everything you do at your own risk!

You will need (most files are available below this post):

- PC with Windows XP SP2 or later

- .Net Framework 2.0 or later

- Samsung Galaxy Ace S5830

- USB to Micro-USB cable

- Samsung Kies (Official Samsung site:

[You must be registered and logged in to see this link.]

- ODIN 4.38 (here:)

[You must be registered and logged in to see this link.]

- SuperOneClick 1.9.1 (here:)

[You must be registered and logged in to see this link.]

- New firmware (You must be registered on this page and remember to select appropriate region!:

[You must be registered and logged in to see this link.]

- OPS file (You must be registered to download:

[You must be registered and logged in to see this link.]

Newest ROMs:

Europe: S5830XXKPB (2.3.3!!!) with CSC -S5830XXKPB & S5830XWKB7 with MULTI-CSC-OXXKB6 (2.2.1)

Asia: SS5830DXKC1 (2.2.1)

Africa/Arabic: S5830JPKC2 (2.2.1)

Provider: S5830BOKB1 (2.2.1)

A. Preparing your phone (if you only want to root your phone, go to step C):

If your phone have root (if your phone don't have root skip this steps):

1) Install Samsung Kies

2) Turn on your phone

3) Enable Debugging at Apliccations>Programming

4) Connect your phone into PC via cable

5) Launch SuperOneClick 1.7 or 1.9

6) Click "Unroot"

7) Wait

When the process is complete turn off SOC and unplug your phone

9) Reboot to apply changes

10) Now you have unrooted phone!

B. Flashing the newest firmware:

1) Turn off your phone

2) Remove your SIM Card and SD Card

3) Extract previously downloaded firmware

4) Open ODIN 4.38 on your PC

5) Select from extracted archive: OPS, Boot, Phone, PDA, CSC (leave EFS and One Package empty)

6) Connect your phone via USB into PC

7) When the screen is turned on hold POWER+VOLUME DOWN+HOME and wait until the phone enters the Download Mode

If ODIN detected and recognised your phone should light up the first square to the left side

9) Press "Start" button and wait, the process should take 5-10 minutes

10) If all goes well your phone should reboot automatically

11) Square should change the color to blue and display "PASS" it means that flashing process was successful and we have the newest firmware

12) Disconnect your phone

13) Turn off your phone

14) Insert your SIM Card and SD Card again

15) Turn on your phone

16) Now you have the newest firmware!

C. Rooting

1) Turn on your phone

2) Enable Debugging at Apliccations>Programming

3) Connect your phone into PC via cable

4) Launch Super One Click 1.7 or 1.9

5) Click "Root"

6) Wait until the program will root your phone

7) When the process is complete turn off SOC and unplug your phone

Reboot

9) Now you have root!

Now you have the newest firmware and root!

haha galing talga